In a recent discussion on comp.sys.acorn.misc news of another RISC OS show in 2011 emerged. The day before the recent London Show, Midlands User Group member, Doug Webb, confirmed that there will be another Midlands Show, again in Kennilworth, with two likely dates being considered – the 2nd and 9th July. Later the same day, another MUG member, Stuart Winsor commented that the 9th looks most likely.
The thread in which these two possible dates were mentioned was prompted by a report in Archive magazine, issue 22:10, in which another member of the group, Ron Briscoe, revealed that there were only a very disappointing 31 visitors to the 2010 Midlands Show, which was held at St John’s Church Hall in Kennilworth. The question is: what can be done to improve numbers?
According to Jim Nagel of Archive Magazine in a post to the the Bristol RISC OS Users mailing list, he received news today that a date has been pencilled in for the South West Show in 2011 – 5th March. No further details are available as yet, and given that Jim used the words ‘pencilled in’ this date is presumably not definite and could be subject to change.
The South West Show has traditionally been held in mid to late February, at The Webbington Hotel, Loxton, and although Jim didn’t mention the venue, that is where it will most likely be held since it is such an easy location for exhibitors to get to, being just off the A38 and very close to the M5.
The date and location for a Wakefield Show for 2011 have been announced. Comments last week on the Archive-online mailing list indicated that the Cedar Court Hotel, Calder Grove had been booked provisionally for 16th April, 2011, but an email received today from Rick Sterry, WROCC‘s assistant show organiser, confirms that the show is going ahead on that date.
Booking forms are yet to be sent out to potential exhibitors, banner graphics have yet to be made available – the purpose of the email was to get the word out as early as possible; the more publicity, the better in this small RISC OS community.
It is now just a few days until the RISC OS London Show, 2010, organised by ROUGOL – the RISC OS User Group of London – which takes place on October 23rd at the St Giles Hotel, Feltham. Doors are open to the public from 11am until 5pm, with tickets costing £5 on the door. Directions can be found on both the show website’s venue page as well as the hotel’s own website, and Tim Hill has posted some detailed directions on comp.sys.acorn.misc based on knowledge gained from occasionally working in the vicinity. Google seems to know where it is, as well.
A single web page has appeared which, on the face of it, is designed to spark interest by containing little or no information, other than the familiar looking name and logo, an interesting catch-line, and a link to the Acorn Computers page on Wikipedia. That page can be found at acorncomputers.com. The first and most obvious reaction to this is to remember the so-called revival of the Acorn brand name a few short years ago, and think “Oh no, here we go again!” Continue reading
Updated 31/1/2010 with a fourth idea and altered to use a vector based acorn.
Updated 1/2/2010 with a new version of idea 4, but with better colours, and a few others.
Following the initial comments made earlier this week about the possibility of starting a new Bristol based RISC OS user group if there is enough interest, Trevor was able to find a copy of the old BARUG (Bristol Area RISC OS User Group) logo:
Bristol Area RISC OS User Group Logo
To my mind, there are a small number of issues with this. First and foremost, it’s a bitmap which means it can’t be easily re-sized (upwards) without a loss of quality. Somebody, somewhere probably does have it in a vector based format – but it matters not, because of the remaining issues. The second is that it uses the word “RISC” instead of “RISC OS” – the former term encompasses a great deal more than just RISC OS (although the flaw with both is their apparent exclusion of, say, 8bit users of old Acorn kit). And the third most obvious issue is the use of the acorns to represent the towers of the Clifton Suspension Bridge; representing the bridge encompasses a well known Bristol landmark in the design – which is great, given that it’s a Bristol based group – but the acorn is somewhat out of date in that it associates the group (and RISC OS) with Acorn Computers Ltd, who are long gone. There may also be trademark issues with the use of the acorn.
Following the initial discussion Trevor Johnson and I had, as summarised earlier this week, I have now set up a mailing list for RISC OS users in Bristol and the surrounding area – this being the first planned step in order to try to guage interest in the possibility of a renewed Bristol based user group.
The easiest way to subscribe to the list is by visiting http://riscository.co.uk/mailman/listinfo/bru-list_riscository.co.uk and filling in the very simple form on that page – email address to be subscribed, your name, and a password (entered twice) – and clicking the ‘subscribe’ button.
Soon after doing that, you will receive an email at the address you entered – this email will contain instructions on how to confirm and complete your subscription. And once that’s done, you will be able to post to the mailing list by sending your emails (from the address with which you subscribed) to firstname.lastname@example.org
I look forward to seeing you on the list!
Unfortunately, the riscository.co.uk domain is currently unavailable, and therefore the mailing lists provided at that domain are not at this time functioning.
The problem was called by a renewal issue with the domain registration; specifically that I was blissfully unaware it was due for renewal, having received no notifications or requests for payment from the registrars. As a result, the domain has been suspended.
Steps have now been taken to rectify this and, provided nothing else goes wrong, things should return to normal soon.
Littered around the country, and possibly overseas as well, there are a number of RISC OS user groups, who meet up on a regular basis, discuss RISC OS issues and have developers and other guests pop in to demonstrate their latest software or give a talk on some aspect of what they do or have done. There used to be such a group for Bristol and the surrounding areas, which I never bothered to join (so in a way I’m partly responsible for what happened next). That group closed down in 2006 due to declining numbers. When its demise was announced, I figured there must still be quite a number of users in the area, so I set up a mailing list for Bristol users.
A mailing list to which nobody subscribed, so after about some time I quietly removed it – there was no need to announce its closure, since it wasn’t going to affect anyone.
A few days ago, though, I was contacted by another Bristol user, Trevor Johnson. He had read of the Bristol user group’s closure on Drobe, and of my setting up the mailing list – and had tried, unsuccessfully, to subscribe. The general point of his email: Is there perhaps any scope for starting a new Bristol user group? Continue reading
RISC OS 5.16 is now available from RISC OS Open Ltd. This an official release and, as well as a number of other updates and improvements to RISC OS 5.xx, if programmed into the Iyonix ROM will solve the clock problem described below. This means the program presented below to act as a temporary solution to the problem is now no longer necessary. If you are using it, please remember to remove it from your boot sequence prior to rebooting your updated computer.
However, please note that if you softload RISC OS 5.16, the clock will continue to need fixing – so if you choose to do that, the temporary fix will continue to be of use to you. I would recommend programming the new version of RISC OS into your ROM, though, and thus negating the need for such temporary work-arounds. Continue reading